MXH

Horizontal multi-stage close coupled pumps in chrome-nickel stainless steel.
Compact and robust construction, without protruding flange and with single-piece lantern bracket and base.
Single-piece barrel casing, with front suction port above pump above pumps axis and radial delivery at top.
Filling and draining plugs on the middle of the pump, accesible from any side (like terminal box).
Connections: threaded ports GAS

MXH WATER PUMP APPLICATIONS

  • For water supply.
  • For clean liquids, without abrasives, which are non-aggressive for stainless steel (with suitable seal material, on request).
  • Universal pump, for domestic use, for civil and industrial applications, for garden use and irrigation.

MXH WATER PUMP OPERATING CONDITIONS:

  • Liquid temperature: 5 °F to 230 °F
  • Ambient temperature up to 104 °C.
  • Maximum permissible in the pump casing: 116 psi.
  • Continuous duty.

MXH WATER PUMP MOTOR:

  • 2-pole induction motor, 60 Hz (n = 3450 rpm).
  • Three-phase 220/460 V.
  • Single-phase 115/230 V, 115 V, 230 V.
  • Capacitor inside the terminal box.
  • Insulation class F.
  • Protection IP 54.

MXH WATER PUMP COMPONENTS MATERIALS:

  • Pump casing: Chrome-nickel steel AISI 304
  • Stage casing: Chrome-nickel steel AISI 304
  • Wear ring: PTFE
  • Impeller: Chrome-nickel steel AISI 304
  • Casing cover: Chrome-nickel steel AISI 304
  • Spacer sleever: Chrome-nickel steel AISI 304
  • Pump Shaft: Chrome-nickel steel AISI 304
  • Plug: Chrome-nickel steel AISI 304
  • Mechanical seal accord: Ceramic alumina, carbon, EPDM

MXH WATER PUMP SPECIAL FEATURES ON REQUEST:

  • Other voltages.
  • Protection IP 55.
  • Special mechanical seal.
  • Seal rings in FPM.
  • Higher or lower liquid or ambient temperatures.

MXH WATER PUMP TECHNICAL DATA:

MODEL HP VOLT PHASE MAX. AMP SUCT DISCH WT.LBS
MXH20 05F16S 0.5 115/230 1 8.2/4.2 1 1/4" 1" 22
MXH30 15C16S 1.5 230 1 10.6 1 1/4" 1" 43
MXH30 15H36S 1.5 230/460 3 7.8/4.8 1 1/4" 1" 43
MXH50 20H36S 2 230/460 3 9/5.2 1 1/2" 1" 41
MXH50 30H36S 3 230/460 3 11.1/6.4 1 1/2" 1" 44

| PUMP FEATURES | PUMP TECHNICAL DATA | PUMP DOWNLOADS | PUMP VIDEOS |

APPLICATIONS

  • Supplying domestic water supply out of a well at desirable pressure
  • Lifting water containing air or other gases
  • Boost pressure from flooded suction applications
  • For garden use

FACT SHEET

CONSTRUCTION

  • Closed coupled self-priming centrifugal pump
  • High quality components for domestic water supply and irrigation in respect to low lead requirements
  • Connections threaded ports NPT
  • All hardware in Stainless Steel
  • Pre-drilled priming port with plug
  • Pre-drilled drain port with plug for maintenance
  • U shape base on all models gives a complete full support to the pump

MOTOR

  • Nema Standard ODP 56J motors for much cooler surface temperature
  • Thermal overload protection
  • Capacitor start, capacitor run type motor for the ½ – ¾ Hp versions
  • Permanent Split Capacitor (PSC) without centrifugal switch for the 1 – 1½ Hp versions
  • Front bearing 6204 for much longer life span
  • All copper winding
  • Class F Dupont Nomex Insulation System, cCSAus approved
  • Single phase ½ – ¾ – 1 – 1½ Hp, 115/230 V
  • Easy voltage conversion
  • Maximum ambient temperature admitted: 40 °C (104 °F)

Technical Data

Materials

Performance Curves

Nominal Current

Pump Dimensions

Package Dimensions

Take a look at these similar or related products

DOWNLOADS

Brochure EN / ES

Manual EN / ES

Spare Parts EN / ES

VIDEOS