CT-T-TP

Close-coupled peripheral pumps (regenerative pumps) with turbine impeller. Compact, patented construction with single-piecemotor casing and pump-side wall.Protected against water entering the motor from outside.
Connections: threaded ports NPT.

APPLICATIONS

  • For clean liquids without abrasives, without suspended solids, non-explosive, non-aggressive for the pump materials.
  • For increasing network pressure (follow local specifications).
  • For the reduced dimensions, these pumps are very well suitable to be mounted in cooling and air-conditioning machines and equipments, circulation, boiler feed.


OPERATING CONDITIONS

  • Liquid temperature from 14 °F to 194 °F.
  • Ambient temperature up to 104 °C.
  • Total suction lift up to 23 ft.
  • Continuous duty.


MOTOR

  • 2-pole induction motor, 60 Hz (n ˜ 3450 rpm).
  • Three-phase 230/460 V.
  • Single-phase 115 V, 230 V, with thermal protector.
  • Capacitor inside the terminal box.
  • Insulation class F.
  • Protection IP 44.


SPECIAL FEATURES ON REQUEST

  • Other voltages.
  • Special mechanical seal
  • Higher or lower liquid or ambient temperatures.


MATERIALS

  • Pump casing: Cast iron GJL 200 EN 1561
  • Lantern bracket: Cast iron GJL 200 EN 1561
  • Casin cover: Brass CW510L (lead free public LAW 111-380)
  • Cast iron GJL 200 EN 1561 for T76, TP 80
  • Impeller: Brass CW510L (lead free public LAW 111-380)
  • Shaft: Chrome-nickel steel AISI 303 for T 76, Tp 80
  • Chrome steel AISI 430 for CT, T61-65-70
  • Mechanical seal: Carbon – Ceramic – NBR

PUMP TECHNICAL DATA:

MODEL HP VOLT PHASE MAX. AMP SUCT DISCH WT. LBS
CT60 03A16S 0.3 115 1 5.9 1″ 1″ 11
CT60 03C16S 0.3 230 1 3 1″ 1″ 11
CT61 03A16S 0.3 115 1 5.9 1″ 1″ 11
CT61 03C16S 0.3 230 1 3 1″ 1″ 11
CT61 03H36S 0.3 230/460 3 2.3/1.2 1″ 1″ 11
T65 05A16S 0.5 115 1 8.4 1″ 1″ 17
T65 05C16S 0.5 230 1 4.2 1″ 1″ 17
T65 05H36S 0.5 230/460 3 2.7/1.7 1″ 1″ 17
T70 05A16S 0.5 115 1 14.4 1″ 1″ 23
T70 05C16S 0.5 230 1 7.2 1″ 1″ 23
T70 05H36S 0.5 230/460 3 4.5/2.6 1″ 1″ 23
T70H 07A16S 0.7 115 1 15 1″ 1″ 23
T70H 07C16S 0.7 230 1 7.5 1″ 1″ 23
T70H 07H36S 0.7 230/460 3 4.7/2.8 1″ 1″ 23
TP80 07A16S 0.7 115 1 13 3/4″ 3/4″ 36
TP80 07C16S 0.7 230 1 6.5 3/4” 3/4” 36
TP80 07H36S 0.7 230/460 3 4.2/2.4 3/4” 3/4” 36
T76 10C16S 1 230 1 8.9 1 1/4″ 1 1/4″ 41
T76 10H36S 1 230/460 3 6.4/3.2 1 1/4″ 1 1/4″ 41

| PUMP FEATURES | PUMP TECHNICAL DATA | PUMP DOWNLOADS | PUMP VIDEOS |

APPLICATIONS

  • Supplying domestic water supply out of a well at desirable pressure
  • Lifting water containing air or other gases
  • Boost pressure from flooded suction applications
  • For garden use

FACT SHEET

CONSTRUCTION

  • Closed coupled self-priming centrifugal pump
  • High quality components for domestic water supply and irrigation in respect to low lead requirements
  • Connections threaded ports NPT
  • All hardware in Stainless Steel
  • Pre-drilled priming port with plug
  • Pre-drilled drain port with plug for maintenance
  • U shape base on all models gives a complete full support to the pump

MOTOR

  • Nema Standard ODP 56J motors for much cooler surface temperature
  • Thermal overload protection
  • Capacitor start, capacitor run type motor for the ½ – ¾ Hp versions
  • Permanent Split Capacitor (PSC) without centrifugal switch for the 1 – 1½ Hp versions
  • Front bearing 6204 for much longer life span
  • All copper winding
  • Class F Dupont Nomex Insulation System, cCSAus approved
  • Single phase ½ – ¾ – 1 – 1½ Hp, 115/230 V
  • Easy voltage conversion
  • Maximum ambient temperature admitted: 40 °C (104 °F)

Technical Data

Materials

Performance Curves

Nominal Current

Pump Dimensions

Package Dimensions

Take a look at these similar or related products

DOWNLOADS

Brochure EN / ES

Manual EN / ES

Spare Parts EN / ES

VIDEOS