PEP

PEP is a centrifugal pump provided with a peripheral impeller that increases the pressure.

The PEP series can be used to pump clean water or any other liquid with similar chemical and physical properties to water without any abrasive particles. The PEP series is recommended for small residential water supply applications, small irrigation systems, air conditioning units, and small boosting systems.

| FEATURES | TECHNICAL DATA | DOWNLOADS

Click to enlarge

APPLICATIONS

Irrigation systems
• Air Conditioning
• Residential
• Water Supply
• Pressure Booster
• Lifting water containing air or other gases
• Lifting capability up to 25 ft.
• Water recirculation

FACT SHEET

Model:	PEP
Type:	Peripheral Pumps
Flow range:	1.2 – 12.6 gpm
Max. Head:	246 ft
Power:	0.3 – 2.0 hp

CONSTRUCTION

Cast iron pump body
Motor Bracket with antilock systems which prevents the pump from blocking after long periods of no usage
Brass peripheral vane impeller
Motor shaft in stainless steel AISI 304
Maximum liquid temperature of 60 °F
Maximum suction lift of 26 feet
Mechanical seal in ceramic and graphite, with elastomer in NBR

MOTOR

Close-coupled TEFC motor with copper windings
Insolation Class F
IP 44 protection
Maximum environment temperature of 40 °C
Single phase, 60 Hz, 3450 rpm with thermal overload protection available
in 110 V, 110/220 V, or 220 V
Three phase, 60 Hz, 3450 rpm available in 220/440 V.
50 Hz or other voltages available upon special request